Antiqued – Aniline Leather Dye Kit – Large 8oz

Aniline Renew Leather Dye Kit Instructions:

All of our leather dyes are the premium quality, professional grade.

1. 1. Spray cleaner onto the cleaning cloth and wipe down leather – *for heavy dirt, spray cleaner directly on the surface and let sit for 5-10 seconds. Massage the cleaner into the surface with hand using supplied rubbers gloves. Wipe off loosened soil with cloth, let dry or use hairdryer to speed up process. (For super heavy soil repeat cleaning.) *If some areas feel waxy or oily after cleaning (areas on leather that had been saturated from body oils etc.) wipe those areas down with 70%-99% rubbing/isopropyl alcohol and a t-shirt wipe to remove sticky finish or oils. Depending on severity may have to be repeated until area feel dry of oil. Failure to remove oils or waxes prior to applying our dyes can lessen adhesion and may cause dyes to wear off prematurely. (If dyes wear off prematurely in areas – clean area again with rubbing alcohol – let dry – reapply the dyes.) Heavy oil saturated areas can take weeks to WICK (migrate) back up to the surface.
   2. SHAKE leather dye bottle for up to 1 minute, apply small amount to sponge, apply in circular motions using a light hand let each coat dry (hair dryer) before applying another coat. Repeat process by dabbing dyes on surface until you are happy with the repair. (for large worn areas in the leather, rub dye into worn areas leather using a glove – let dry) If area is rough, lightly sand with supplied sandpaper. If lighter dye colors are not covering ingrained stains or blemishes – dab areas with the sponge for a thicker coating and let fully dry over night.
   3. That’s It! You’re done! – NO SEALER IS NESSESSARY because our Aniline Renew Leather Dye has the “SEALER built into the FORMULATION!” (*Optional leather protector can be applied over top of Aniline Renew Leather Dyes for absolute maximum protection).

      Tip: Always use a light hand when applying dye to reduce the chance of streaking. Clean all sponges and gloves with warm soapy water. Make sure to snap the clear airtight cap protector back on the black sprayer – or the SEALER will cure and plug the nozzle!)

For further instructions and tips, please visit our YouTube channel : www.youtube.com/user/Leathertouchupdye

You can also visit our FAQs page where you’ll find answers to many common questions here: www.leathertouchupdye.com/how-to-fix-leather-furniture-faqs

If you have concerns or questions about your recently received order, please visit our Concerns – Troubleshooting page here: www.leathertouchupdye.com/concerns